Micro Technologies offer an optimum quality of Flexural Tensile Testing Machine. The offered product is manufactured and designed using the finest quality components with the help of contemporary technology. The offered product is delivered to our buyers only after its proper checking on different such as dimensional accuracy, performance, finish, etc. The instrument employs a friction free, accurate, double lever system, the load being applied by means of sliding weight on the top lever. The capacity of the units is 900 kgs. After fixing the briquette in the jaws, the machine is switched on. The sliding weight slides over the calibrated lever thus applying tension to the specimen. A micro switch fitted instantly stop the machine on failure of the briquette and on failure the tensile load is accurately 0.5kg. By means of a marker provided on the sliding weight to its zero position. Suitable for operation on 230 V, 50 cycles, Single Phase, A.C. supply. This single lever machine is designed for flexural tests on 40.1 x 40 x 160 mm mortar prisms and tensile tests on mortar briquettes. Load is applied by a weight travelling along the beam at a constant rate, driven by a motor/gearbox. Readings are made by means of a cursor visible through a window in the moving weight. To prevent overloading, a sensor is incorporated in the weight and automatically stops the machine at its maximum capacity of 10 KN.