Care of critically ill patients is an integral part of hospital care but ICU beds are a limited resource in many settings. How ICU beds are used has implications for the care of individual patients, as well as resource use and costs at the hospital and regional level. Some aspects of ICU bed utilization may be specific to individual hospitals, but others are more generalize across hospitals and health care systems.
This range is appreciated for applications in numerous industries and sectors for various purposes. Quality
Conformity to standard for safety & electromagnetic compatibility | IEC-60601-1-2:2001 Standard or IS-13450 |
Purpose | ICU Bed are required to be used in Intensive Care Unit for comfort of Patient & facilitate comfortable transfer to & from Emergency/ OT/ Ward etc. & also to carry out point of care process including Radio-logical procedure at bed side |
Type of ICU Bed Actuator | Mechanical (Handle Operated) |
Type of mechanism for functioning or controlling angular motion of bed part | Super Smooth Crank Screw Mechanism |
Type of mechanism for functioning or controlling Height of bed | Super Smooth Crank Screw Mechanism |
Number of section provided in Bed Top | 4 |
Base frame and support frame should be fabricated using metallic square / rectangular section of adequate cross section and thickness to provide high structural strength and stability | Yes |
Bed top perforated | Yes |
Bed should have radio translucent top (X-Ray translucent) | No |
Availabilty side panel/Side safety guard | Yes |
Type of side panel | Swing Up Down type |
Number of Side panel | 4 |
Availability Head & Foot panel/Board | Yes |
Shape of Head & Foot panel /Board | C-type |
Type of Head & foot Panel | Detachable type |
Material of head and foot panel | ABS (acrylonitrile-butadiene styrene) |
Availability of good grip for head/foot or side panel | Yes |
Slots for IV rod at four corners provided | Yes |
Number of hooks provided in IV rod | 2 |
Availability of rectangular telesccopic tube box housing for tension spring | NA for Super Smooth Crank Screw Mechanism & Hydraulic mechanism for height |
Degree Angle & Height indicator shall be provided at both foot & head side | No |
X-Ray film holder used from | One side |
Type of X-Ray Film holder | Cassettle Based System |
Power of motor in HP | N/A |
Better quality bearing should be used | Yes |
Avaiability of patient constraint belt provided on both side of bed | No |
Availability of Noiseless, non rusting swivel castor wheel/ roller with for easy Mobility & Steering | yes |
Facility of braking and locking mechanism provided in castor roller | Yes |
Number of caster to which braking system provided | 2 |
Availiability Corner buffer in all four corner to protect patient from collision shock | Yes |
Safe working load capacity of ICU bed in kg | 150 |
Facility of instant non powered/mechanical CPR( Cardiopulmonary Resuscitation) release at the head end for emergency | Yes |
Lilen Holder/Urine Bag holder provided | Yes |
Accessory Rail Provided at all four side of bed | Yes |
Mattress provided with ICU bed | Yes |
ICU mattress must X-ray translucent | Yes |
Mattress foam of the Bed should be with Anti Microbial agent incorporated into all components that assists in Prohibiting growth of bacteria & fungi and easy to clean | Yes |
Mattress shall be made of High resilient & bio-density foam | NA (If mattress is not provided) |
Mattress should be translucent to allow radiography using portable X-ray machines | Yes |
Mattress should be made in cube cut design & independent cubes promote air flow to reduce moisture | Yes |
Material for ICU Bed Mattress | PU Foam |
Maximum thickness of Mattress in mm with tolerance of ± 2 mm | 100 |
Approx foam Density for Head/sacrum in kg/m3 tolerance | 40 |
Approx foam Density for Heel in kg/m3 | 30 |
Therapeutic Weight limit for mattress in kg | 150 |
Operating temperature & humidity for ICU bed | 10 -40 Deg C and relative humidity of 15-90% |
Power Supply ( as appropriate fitted with Indian plug) | N/A for mechanical operated |
Facility of Resettable overcurrent breaker shall be fitted for protection | N/A for handle operated |
ICU Bed frame and top must be Rust Proof | Yes |
Type of powder/Paint coating done to ICU Bed frame,top & side panel | Epoxy Polyester Coating 50-60 microns |
ICU Bed should be made up of high quality metal, pretreated with materials providing good finish, scratch resistant, bacteriostatic coating | Yes |
Process used for pre chemically treatment of metallic bed component | Dip tank processes |
Facility of easily cleaning /maintenance to ICU Bed | Yes |
Warranty | 3 Year |
Product instruction manual shall be supplied | Yes |
Standard Tool Kit for maintananace and Trouble Shooting to be provided with ICU bed | Yes |
Demonstration of working to be provided after completing supplies before Acceptance | Yes |
Material for the frame of bed | MS |
Material for side railling/ Side Safety guard | ABS Plastic |
Material for Head & Foot Panel/Board | ABS Plastic |
Material for Bed top Section | MS |
Material of wheels | Polyester |
Material for IV rod with chromium plated | SS |
Maximum Adjustable Back Rest Angle in Degree | 0-70 |
Maximum Adjustable Knee Rest Angle in Degree | 0-40 |
Diameter of Castor Roller | 130-150 mm |
Maximum Trendlenburg Angle in Degree with tolerance ±2 degree | 10 |
Maximum Reverse Trendlenburg Angle in Degree with tolerance ± 2 degree | 10 |
Bed height adjustibility range in mm | 500-900 |
Mean coil diameter of tension spring used in counter weight mechanism in mm | N/A for Super Smooth Crank Screw Mechanism & Hyraulic mechanism for height |
Spring coil diameter used in counter weight mechanism in mm | N/A for Super Smooth Crank Screw Mechanism & Hyraulic mechanism for height |
Clearance between Bed Base frame and Floor surface in mm | 150 |
Length of bed in mm with 2% tolerance | 2100-2200 |
Width of bed in mm with 2% tolerance | 1000-1050 |
Weight of ICU Bed | 100 kg |
Manual Five Function ICU Bed manufacturer in india