| MODEL | MT-14 | |
| Capacity | 500 kg in X, Y & Z direction force | |
| Dynamometer Size | 350(L) x 258(W) x 100(H) with mounting hole (16mm) on Base Plate | |
| Job Mounting* | Holes (M10) provided to fix 3” Self Centering Vice | |
| Sensor Type | Strain Gauge Based | |
| Sensor Housing | Metal Enclosure with Powder Coating | |
| Display | 3 Independent 31/2 digit LED display | |
| Electrical Connection | 15 Pin D connector with 3 meters long cable | |
| Resolution | 1 kg for all 3 forces | |
| Cross Sensitivity | 5% of the Rated Load | |
| Linearity | 1% of the Rated Load | |
| Zero Balancing | Corse and Fine Potentiometer on Front Panel | |
| Analog Output | Three independent Analog output terminals provided (mV output) | |
| PC Interface | - | |
| Power Supply | 230V +/- 10% @ 50hz | |
| Software** | - | |
| Instrument Enclosure | Powder Coated Metal enclosure 400(W) x 300(D) x 100(H) | |
| Accessories | 3” Self-centering Vice- 1No | |
We offers Tool Dynamometers to measure cutting forces on various machines like Lathe, Drill, Milling and Grinding machines. Tool dynamometers are useful to study, analyze the optimum feed, speed and depth of cut on different materials. The dynamometers are also available in various capacities as per customer requirement.
Milling Tool force Dynamometer sensors three direction forces and displayed simultaneously on the Digital Display Unit. The Dynamometer can to be mounted on the machine Table directly using T bolts. Self Centering Vise (3”) can be mounted directly on the sensor to hold the job. The display unit comes with two models one with 3 independent display for X,Y & Z forces with Analog Output to interface with external recorder. The other one has Computer interface to Log the data to computer. Also this model has inbuilt 128kb of memory to store the data as per customer set time in sec. The system works on 230V 50hz power supply.
| MODEL | MT-14 | |
| Capacity | 500 kg in X, Y & Z direction force | |
| Dynamometer Size | 350(L) x 258(W) x 100(H) with mounting hole (16mm) on Base Plate | |
| Job Mounting* | Holes (M10) provided to fix 3” Self Centering Vice | |
| Sensor Type | Strain Gauge Based | |
| Sensor Housing | Metal Enclosure with Powder Coating | |
| Display | 3 Independent 31/2 digit LED display | |
| Electrical Connection | 15 Pin D connector with 3 meters long cable | |
| Resolution | 1 kg for all 3 forces | |
| Cross Sensitivity | 5% of the Rated Load | |
| Linearity | 1% of the Rated Load | |
| Zero Balancing | Corse and Fine Potentiometer on Front Panel | |
| Analog Output | Three independent Analog output terminals provided (mV output) | |
| PC Interface | - | |
| Power Supply | 230V +/- 10% @ 50hz | |
| Software** | - | |
| Instrument Enclosure | Powder Coated Metal enclosure 400(W) x 300(D) x 100(H) | |
| Accessories | 3” Self-centering Vice- 1No | |
Enquiry Cart (