Enquiry now

Micro Drill Tool Dynamometer manufacturers in India

MODAL NO: MT-16

QTY


MODEL MT-16
Capacity 500 kg Thrust and 20kg-m Thrust
Dynamometer Mounting 180 mm Dai Flange with slotted holes to mount on the m/c table
Job Mounting* 3” Self-centering Vice mounted on the flange of the dynamometer
Sensor Type Strain Gauge Based
Sensor Housing Metal Enclosure with Chromium Plating
Display 2 independent 3.5 digit LED displays
Electrical Connection 9 Pin D connector with 3 meter long cable
Resolution 1kg for Thrust and 0.1kgm for Torque
Cross Sensitivity 5 % of the Rated Load
Linearity 1 % of the Rated Load
Zero Balancing Corse and Fine Potentiometer on Front Panel
Analog Output Two Independent analog output Terminals provided
Power Supply 230V +/- 10% @ 50hz
Instrument Enclosure Powder Coated Metal enclosure 250(W) x 300 (D) x 100 (h)
Accessories 3” Self-Centering vice – 1No.

We offers Tool Dynamometers to measure cutting forces on various machines like Lathe, Drill, Milling and grinding machines. Tool dynamometers are useful to study, analyze the optimum feed, speed and depth of cut on different materials. The dynamometers are also available in various capacities as per customer requirement.

Drill Tool force Dynamometer senses Torque and Thrust forces and displayed simultaneously on the Digital Display Unit. The Dynamometer has to be mounted on the machine Table directly using T bolts. Self-Centering Vise (3”) can be mounted directly on the sensor to hold the job. The display unit comes with two models one with 2 independent display for Torque and Thrust forces with Analog Output to interface with external recorder. The other one has Computer interface to Log the data to computer. Also this model has inbuilt 128kb of memory to store the data as per customer set time in sec. The system works on 230V 50 Hz power supply.

MODEL MT-16
Capacity 500 kg Thrust and 20kg-m Thrust
Dynamometer Mounting 180 mm Dai Flange with slotted holes to mount on the m/c table
Job Mounting* 3” Self-centering Vice mounted on the flange of the dynamometer
Sensor Type Strain Gauge Based
Sensor Housing Metal Enclosure with Chromium Plating
Display 2 independent 3.5 digit LED displays
Electrical Connection 9 Pin D connector with 3 meter long cable
Resolution 1kg for Thrust and 0.1kgm for Torque
Cross Sensitivity 5 % of the Rated Load
Linearity 1 % of the Rated Load
Zero Balancing Corse and Fine Potentiometer on Front Panel
Analog Output Two Independent analog output Terminals provided
Power Supply 230V +/- 10% @ 50hz
Instrument Enclosure Powder Coated Metal enclosure 250(W) x 300 (D) x 100 (h)
Accessories 3” Self-Centering vice – 1No.

Related Products