Enquiry now

ELEVATOR LIFT CONTROL MODULE FOR PLC TRAINER manufacturer in india

MODAL NO: MT-E601A

QTY


This model is intended as a control object for programming exercises with a control system, PLC or computer. The process consists of a lift cage to be moved between 3+ Ground floors. Push buttons are provided on all the floors to call the lift. The lift cage has LEDs to indicate the lift position and a button for door open/close simulation. Geared DC motor is used to move the cage up and down through a pulley and rope arrangement. 

This model is intended as a control object for programming exercises with a control system, PLC or computer. The process consists of a lift cage to be moved between 3+ Ground floors. Push buttons are provided on all the floors to call the lift. The lift cage has LEDs to indicate the lift position and a button for door open/close simulation. Geared DC motor is used to move the cage up and down through a pulley and rope arrangement. 

SPECIFICATION

Inputs Lift up, Lift down, 4 lift position LEDs 8 acknowledgement LEDs, buzzer for error indication.

Outputs 4 proximity sensors, 4 lift calling push buttons Door open / close toggle switch, buzzer, lift up lift down.

Logic level 24V DC.

Connection via 4mm patch card terminals or d type sub-plugs for quick connection to PLC base plate.

Measurements 650×340×400(H×B×D,mm)approx.


Related Products