1. Stepper Motor Interface
• This interface consists of a stepper motor (+12V-+5V DC, 3 Kg.cm torque),
• Power Supply and required driver circuitry along with the necessary software to control the operation of the stepper motor.
• This interface permits ON/OFF control of the individual coils of the stepper motor at varying speeds in either direction.
1. Stepper Motor Interface
• This interface consists of a stepper motor (+12V-+5V DC, 3 Kg.cm torque),
• Power Supply and required driver circuitry along with the necessary software to control the operation of the stepper motor.
• This interface permits ON/OFF control of the individual coils of the stepper motor at varying speeds in either direction.
2. 8255 Study Card Interface
• This study card is designed to demonstrate different modes of operation of Intel 8255Programmable Peripheral Interface to work with Intel microprocessor 8085, 8086, 8088 and 8051.
• It has four 8-way dipswitches to control the input lines of 8255 Port A and Port B lines.
• Three lines of Port Care controlled using push buttons.
• The port lines statuses are displayed using 8 Red (Port A), 8GREEN(Port B) and 5 YELLOW LED (Port C).Push buttons S1, S2 & S3 are also used to stimulate STB or ACK signals
INTERFACING MODULES 8085 manufacturer in india
Enquiry Cart (