SPECIFICATION:
S.N. Particular
1 Training system control panel having rating of Solar Panel 500 VA , and 100VA of Wind Power and it should be used as solar and Wind training system and also power generation as well.
2 Training system control panel should have built in DC voltmeters, DC ammeters, AC Voltmeter AC multifunction meter(for AC current, voltage, power, frequency)
3 Training should have control panel built in protection circuit for battery & solar panel
4 Training system control panel have built in 30A terminals for making the connection
SPECIFICATION:
S.N. Particular
1 Training system control panel having rating of Solar Panel 500 VA , and 100VA of Wind Power and it should be used as solar and Wind training system and also power generation as well.
2 Training system control panel should have built in DC voltmeters, DC ammeters, AC Voltmeter AC multifunction meter(for AC current, voltage, power, frequency)
3 Training should have control panel built in protection circuit for battery & solar panel
4 Training system control panel have built in 30A terminals for making the connection
5 Training System includes 250Wp solar panel: 2 Nos., Wind Generator 10VA 1Nos. Battery 100Ah: 2 Nos., PCU (POWER AND CHARGE CONTROLLER UNIT): 1 No. , Control panel for experiments equipped with meters, connecting terminals and switches
6 Solar Panel: 02 Nos.
Pm : 250Wp,Voc : 43V,Isc : 7.75A,Vmp : 35V,Imp : 7.14A
Wind Generator: 1Nos.
7 POWER AND CHARGE CONTROLLER UNIT
Inverter Capacity 600VA and Input Voltage 190~260V AC, Output Voltage on Mains mode is same as input, Output Voltage on UPS mode 210~245V,Output Frequency on UPS mode 50Hz ±0.1Hz,Output waveform on Mains mode is same as input, Output waveform on UPS mode Modified Sine wave, Battery Charging Current 12A,Efficiency at full load >80%, UPS overload and short circuit facility is available , control panel design based Microcontroller, MCB : C Type 16A
8 Battery: 02 Nos. Solar Battery of Capacity: 12V/100Ah, Type : C10
9 Charge Controller Technologies: Solar PV Module : 24–50V,Current : 40A,Battery voltage : 24V,Technology : PWM based MPPT, Charging Stage : Bulk, Absorptions and Float
10 Meter specification : DC Voltmeter : 0-300V ; DC Ammeter : 0-40A ; Multi Function Meter : Voltage-10-230V ; Current-100mA-5A ; Watt-10-1200W ; Energy meter Display Resolution- 0.001kWh ; Frequency-50Hz
11 Training platform used to conduct below experiment
a Measurement and Analysis of Different parameters of Solar PV Module : open circuit and short circuit, parameter measurement with series and parallel PV modules , I-V characteristic and Power curve of PV module and PV array ., efficiency and fill factor
b Study of Wind Power and Wind Energy.
c Load Estimation and calculation
d Study of Charge controller
e Study of different parameter of inverter efficiency , PWM switching , charging of batteries , over load and over battery protection
STANDARD ACCESSORIES : Main cord , Patch cord, Operating manual
ELECTRIC SUPPLY SPECIFICATION: AC 240 v
SOLAR AND WIND POWER GENERATION AND TRAINING SYSTEM manufacturer in india