OVERVIEW:

• Miniature form of Generation, Transmission, Protection and Distribution System 

WHAT WE ARE OFFERING:

1. MT-E476: POWER GENEATION AND PARALLEL OPERATIONS OF TWO ALTERNATORS (SYNCHRONIZATION OF TWO ALTERNATORS)

• DC Shunt Motor Coupled With Synchronous Generator 2Nos.

• Power Generation and Parallel Operation of Synchronous Generator Control Panel 1Nos.

2. MT-E281D: THREE PHASE TRANSMISSION LINE TRAINER

• 3Phase Auto Transformer Unit

• 3Phase Resistive Load

• 3Phase Inductive Load

• 3Phase Capacitive Load

3. MT-E291A: 3 PHASE POWER DISTRIBUTION TRANSFORMER TRAINER

• 3Phase Transformer Unit 1.5KVA

• 3Phase Auto Transformer Unit

4. MT-E704B: PROTECTIVE RELAYING TRAINING SYSTEM (PROTECTION)

MT-E476 PARALLEL OPERATIONS OF TWO ALTERNATORS (SYNCHRONIZATION OF TWO ALTERNATORS)

SCOPE OF LEARNING: 

• Study of Parallel  Operations of Two Ac Alternator (Synchronizing the 2 Alternator)

• Study of Operation of DC Shunt Motor 

• Study of Operation of 3Phase Synchronous Generation.

• Study of Dark Lamp Method using Parallel  Operations of Two Ac Alternator

• Study of Bright Method using Parallel  Operations of Two Ac Alternator

• TECHNICAL SPECIFICATIONS: 

Power Supplies:

• DC Power Supply 0-230V AT 2A (Field Control) 2Nos.

• DC Power Supply +230V AT 2A (Field Control) 2Nos.

• Operated on Mains power 230V, 50Hz +10%

Digital/Analog Meters:

• Voltmeter DC 2Nos.

• Frequency Monitoring Relay 2Nos.

• Frequency Meter 2Nos.

• Ammeter DC 4Nos.

• Voltmeter AC 2Nos.

• Ammeter AC 2Nos.

• Synchroscope 1Nos.

• RPM Meter 2Nos.

• Multifunction Meter 2Nos.

• Components are mounted on the panels are:

• Three Phase Lamp Load Switched Control

• Synchronizing Lines For Parallel Operations.

• Output Through 4Pole MCB (For Alternators)

• 3 Point Starter 2Nos.

• Color Indication For Output

• Variac (For Field Control Power Supply) 2Nos.

SALIENT FEATURES:

• Voltage regulation within limit as per ISS.

• Special guard also provided on the coupling to avoid any mis-happening during operation.  

• D.C. Motor Shunt 2HP coupled with A.C. Alternator

1KVA (Separately or self Excited.        

• Front panel built with high class insulated Bakelite sheet with Sticker well printed circuits and symbols.

• Instruction manual.

• Patch Cords 4mm (Heavy Duty) 1Meter Length.

• High Voltage Test Points are Provided With 4mm Safety Sockets

• The trainer is housed in Metal cabinet. 

• Short Circuit protection with the MCB. 

• Size of the trainer set 65”x24” 

OPTIONAL ACCESSORIES: 

• No

SCOPE OF SUPPLY:

• DC Motor 2HP, 230V and AC Synchronous Alternator (1KW).  (2Nos.)

• Synchronizing of Two Alternators Control Panel (1Nos.)

MOTOR SPECIFICATIONS:

• DC Shunt Motor 2HP

• Operating Voltage:230V

• Type: DC

• RPM: 1440 RPM. 

• Wattage: 1.5KW 

• Terminations: 4 BTI 15 Terminals

• Shaft: Single 

• Frame:132

• B3

• SPDP

• 1P23

• 1C01

• Solid Yoke Extension

• Fitted on Metal Base.

GENERATOR SPECIFICATIONS:

• AC Alternator 1KW

• Operating Voltage:415V

• Type: AC

• RPM: 1440 RPM. 

• Wattage: 1KW 

• Terminations: 5 BTI 15 Terminals

• Shaft: Single 

• Frame:132

• B3

• SPDP

• 1P23

• 1C01

• Solid Yoke Extension

• Fitted on Metal Base.

MT-E281D THREE PHASE TRANSMISSION LINE TRAINER

SCOPE OF LEARNING: 

• Study of Three Phase Transmission Lines

• TECHNICAL SPECIFICATIONS: 

Power Supplies:

• AC Power Supply 0-415V AT 4A (Optional)

• Operated on Mains power 415V, 50Hz +10%

Digital/Analog Meters:

• Voltmeter 2 Nos. 

• Ammeter 2Nos. 

• 4A Variac (3 Phase)

• Transmission Lines 400Km (Through Resistor-Capacitor and Inductors)

SALIENT FEATURES:

• Front panel built with high class insulated Bakelite sheet with Sticker well printed circuits and symbols.

• Instruction manual.

• Patch Cords 4mm (Heavy Duty) 1Meter Length. 

• High Voltage Test Points are Provided With 4mm Safety Sockets

• The trainer is housed in Metal cabinet. 

• Short Circuit protection with the MCB.

• Size of the trainer set 30”x24” 

ACCESSORIES:

• Resistive Load

• Capacitive Load

• Inductive Load

MT-E291A 3 PHASE POWER DISTRIBUTION TRANSFORMER TRAINER

SCOPE OF LEARNING: 

• Study of 3 Phase Transformer Distribution System

• TECHNICAL SPECIFICATIONS: 

Power Supplies:

• AC Power Supply 0-415V AT 4A (Optional)

• Operated on Mains power 415V, 50Hz +10%

Digital Meters:

• Voltmeter (For Primary and Secondary)

• Ammeter  (For Primary and Secondary)

Components are mounted on the panels are:

• 3 Phase Lamp Load (Start Connected) Switched Control

• 3 Phase Lamp Load Ring System

• 3 Phase Transformer Unit (440V/220V) Copper Winding

• Emergency Stop 

SALIENT FEATURES:

• Front panel built with high class insulated Bakelite sheet with Sticker well printed circuits and symbols.

• Instruction manual.

• Patch Cords 4mm (Heavy Duty) 1Meter Length.

• High Voltage Test Points are Provided With 4mm Safety Sockets

• The trainer is housed in Rack Type Channel Extruded Panel

• Panel is modular based easy to place and remove the Module. 

• Short Circuit protection with the MCB.

• Size of the trainer set 42”x24” 

OPTIONAL ACCESSORIES:

• Resistive Load.

MT-E704B PROTECTIVE RELAYING TRAINING SYSTEM (PROTECTION)

SCOPE OF LEARNING: 

• Study about different protection techniques

• Current Transformer and Potential Transformer 

• Voltage Monitoring Relay (Single and Three Phase)

• Over Current Relay (Single andThree Phase) 

• Reverse Power Relay

• Phase Sequence Relay

• Three Phase Power Factor Relay

• Synchro Check Relay

• Frequency Monitoring Relay (Three Phase)

 TECHNICAL SPECIFICATIONS: 

• MCB (Power Switch) : Three Phase 10A 

• Interconnections : 4mm Safety Socket

• Current Transformer and Potential Transformer

• Voltage Monitoring Relay (Single and Three Phase)

• Over Current Relay (Single andThree Phase)

• Reverse Power Relay

• Phase Sequence Relay

• Three Phase Power Factor Relay

• Synchro Check Relay

• Frequency Monitoring Relay (Three Phase)

• Wattmeter/ Var Meter

• Power Factor Meter

Power supplies:

• Single Phase AC Power Supply : 220V, 50/60Hz 

• Three Phase AC Power Supply :230V Phase voltage, 415 Line voltage ± 10% 50 Hz

• Operated on Mains power 415V, 50Hz +10%

SALIENT FEATURES:

• Light Indicator for Mains.

• Front panel built with high class insulated Printed Bakelite/Aluminum Board sheet with well printed circuits and symbols.

• 4 Pole MCB for Short Circuit protection 

• Instruction manual.

• Emergency Stop also Provided

• Connections are brought out through 4mm Colored Safety Sockets.

• Patch Cords 4mm

• The trainer is housed in Modular Based Rack Type Aluminum Extruded Metal cabinet. 

• Size of the trainer set 54’’x24” 

OPTIONAL ACCESSORIES:

• No

SCOPE OF SUPPLY (PACKING LIST):

• Patch Cords 4mm

• PROTECTIVE RELAYING TRAINING SYSTEM (PROTECTION)