Nylon Pulley with Table Clamp
Product Specification Sheet
Nylon Pulley with Table Clamp
Model Number: MTM-25
The Nylon Pulley with Table Clamp from Micro Technologies is a smooth-running laboratory pulley featuring a 50 mm diameter nylon sheave mounted in a ball-bearing clamp assembly. It can be clamped securely to compatible laboratory surfaces up to 50 mm thick, providing a convenient arrangement for force, tension, motion and simple-machine experiments.
Product Specification
The Nylon Pulley with Table Clamp from Micro Technologies is designed for physics and mechanics laboratory experiments requiring a compact pulley that can be mounted directly onto a bench, board or other compatible working surface.
The apparatus incorporates a 50 mm diameter sheave manufactured from nylon. Nylon provides a lightweight and practical pulley configuration suitable for repeated laboratory demonstrations and mechanics experiments.
A ball-bearing arrangement supports smooth rotation of the pulley during operation. This makes the apparatus particularly useful where a cord must move freely over the sheave while experimental loads are applied.
The pulley is integrated with a table-clamp mounting system, allowing the apparatus to be attached directly to the edge of a suitable laboratory surface.
The clamp can accommodate surfaces up to approximately 50 mm thick, providing greater mounting flexibility across a range of laboratory benches, boards and experimental platforms.
The direct bench-mounting arrangement makes installation straightforward and reduces the need for a separate stand in many basic mechanics experiments.
As a fixed pulley arrangement, the apparatus can be used to demonstrate how a pulley can redirect an applied force while a cord transfers tension between an effort and a load.
The Nylon Pulley with Table Clamp is suitable for experiments involving force, tension, load and motion. Compatible masses can be suspended from the cord to establish controlled loading conditions.
The apparatus can also be incorporated into suitable simple machine experiments, allowing users to investigate basic relationships between effort, load and pulley action.
When combined with a compatible Spring Balance, the pulley can support quantitative investigations in which applied force or cord tension is measured under different loading conditions.
Its table-mounted arrangement is particularly convenient for experiments where a horizontal cord needs to be redirected over the edge of a bench toward a vertically suspended mass.
The smooth-running ball-bearing configuration helps minimize unnecessary rotational resistance, improving pulley movement during suitable experimental demonstrations.
The apparatus can complement other mechanics accessories such as slotted masses, mass hangers, hook weights, Spring Balances and laboratory cords.
Its compact construction makes the pulley easy to reposition between experiments and convenient to store when not in use.
Manufactured and supplied by Micro Technologies, the Nylon Pulley with Table Clamp is suitable for physics laboratories, mechanics laboratories and scientific teaching facilities requiring a practical bench-mounted pulley.
Features
- Table clamp pulley design
- Smooth-running pulley configuration
- Nylon sheave
- Approx. 50 mm sheave diameter
- Ball-bearing mounting
- Direct bench attachment
- Suitable for surfaces up to 50 mm thick
- Compact laboratory configuration
- Convenient cord guidance
- Suitable for fixed-pulley experiments
- Useful for suspended-load setups
- Suitable for force investigations
- Suitable for tension experiments
- Easy mounting and removal
- Reusable mechanics laboratory apparatus
Benefits
- Ball bearing supports smooth pulley rotation
- Nylon sheave provides lightweight construction
- Direct table mounting simplifies experimental setup
- Accommodates surfaces up to 50 mm thick
- Useful for force and tension investigations
- Suitable for simple-machine demonstrations
- Can redirect force in compatible mechanics setups
- Works with masses and force-measuring equipment
- Compact design requires minimal storage space
- Easy to transfer between laboratory workstations
Product Specifications
| Specification | Details |
|---|---|
| Product Name | Nylon Pulley with Table Clamp |
| Product Type | Bench-Mounted Laboratory Pulley |
| Sheave Material | Nylon |
| Sheave Diameter | Approx. 50 mm |
| Bearing | Ball Bearing |
| Mounting | Table / Bench Clamp |
| Maximum Surface Thickness | Approx. 50 mm |
| Pulley Configuration | Single |
| Operation | Smooth Running |
| Primary Application | Force / Tension / Simple Machine Experiments |
| Use | Physics / Mechanics Laboratory |
Applications
- Fixed pulley experiments
- Simple machine experiments
- Force demonstrations
- Tension investigations
- Suspended-load experiments
- Load and effort studies
- Motion experiments
- Direction of force demonstrations
- Spring Balance experiments
- Hanging-mass experiments
- Bench-mounted mechanics experiments
- Pulley system demonstrations
- Physics laboratory practicals
- Mechanics laboratory experiments
Available Variants
Nylon Pulley Table Clamp, 50 mm Nylon Pulley, Ball Bearing Table Pulley, Bench Clamp Pulley, Laboratory Nylon Pulley, Fixed Pulley with Clamp, Physics Lab Table Pulley, Mechanics Laboratory Pulley
SKU System
MT-NPTC-Series
FAQs
What is the Nylon Pulley with Table Clamp used for?
It is suitable for force, tension, motion, suspended-load and simple-machine experiments in physics and mechanics laboratories.
What material is the pulley sheave made from?
The sheave is manufactured from nylon.
What is the diameter of the pulley?
The nylon sheave has an approximate diameter of 50 mm.
Does the pulley have a ball bearing?
Yes. The pulley incorporates a ball-bearing arrangement for smooth running.
How is the pulley mounted?
It incorporates a table clamp that allows the pulley to be attached directly to a compatible laboratory bench, board or working surface.
What is the maximum surface thickness it can accommodate?
The clamp can be attached to suitable surfaces up to approximately 50 mm thick.
Can it be used as a fixed pulley?
Yes. It can be used as a fixed-pulley arrangement in suitable simple-machine and force experiments.
Can it be used with laboratory masses?
Yes. Compatible mass hangers, slotted masses or hook weights can be used with a suitable cord for controlled-load experiments.
Can a Spring Balance be used with the pulley?
Yes. A compatible Spring Balance can be incorporated into appropriate experimental arrangements for measuring force and tension.
Does it require a separate laboratory stand?
For normal bench-mounted applications, a separate stand is generally unnecessary because the pulley clamps directly to a suitable working surface.
Why Choose Our Products
- Manufactured and supplied by Micro Technologies
- 50 mm nylon pulley
- Smooth ball-bearing arrangement
- Convenient table-clamp mounting
- Suitable for surfaces up to 50 mm thick
- Compact and reusable configuration
- Suitable for force and mechanics experiments
- Ideal for institutional laboratory requirements
- Bulk procurement available
- OEM supply supported
Call to Action
Add a smooth and versatile pulley solution to your mechanics laboratory with the Nylon Pulley with Table Clamp from Micro Technologies. Contact us for competitive institutional pricing, bulk physics laboratory supply, OEM requirements and customized quotations.
