Multiple Battery Holder

The Multiple Battery Holder is a convenient electrical laboratory accessory developed for experiments where different low-voltage DC outputs are required from a set of standard batteries. It can accommodate four batteries and provides selectable voltage combinations without requiring the individual cells to be removed from the holder.

The internal metal contact strips provide electrical connections between the installed batteries. By selecting the appropriate connection arrangement, users can obtain approximately 1.5 V, 3.0 V, 4.5 V or 6.0 V. This makes the holder useful for practical demonstrations of series battery connections, voltage addition and basic circuit behavior.

A major advantage of this battery holder is its straightforward connection system. The unit is supplied with color-coded connecting wires and insulated crocodile clips, allowing users to connect the battery output to suitable laboratory components, circuit boards, lamps, motors, meters or other low-voltage experimental equipment. The clips provide a convenient temporary connection method during practical sessions.

The four-cell arrangement makes the product particularly useful for physics and electrical experiments where students need to compare circuit performance at different supply voltages. Instead of repeatedly removing or rearranging batteries, the required voltage can be selected through the holder's contact arrangement, saving setup time during demonstrations.

The holder is suitable for educational laboratories covering basic electricity, electrical circuits, potential difference, current flow, battery combinations and introductory electronics. Its simple construction also makes it accessible for classroom demonstrations and student practical work.

Micro Technologies supplies this Multiple Battery Holder for institutional laboratory setups, educational equipment requirements and bulk procurement. It can be maintained as a reusable accessory alongside physics experiment kits and basic electrical circuit apparatus.

For dependable operation, batteries should be installed with the correct polarity and should be compatible with the holder. The contact strips, wires and crocodile clips should be kept clean and free from damage. The holder should only be connected to equipment within the appropriate voltage and current requirements.

Features

• Holds up to four standard batteries.
• Selectable output of approximately 1.5 V, 3 V, 4.5 V and 6 V.
• Metal contact strips provide electrical connection between cells.
• Allows voltage selection without removing individual batteries.
• Supplied with color-coded connecting wires.
• Includes insulated crocodile clips for convenient circuit connections.
• Suitable for basic electricity and circuit experiments.
• Useful for physics and educational laboratory applications.
• Simple arrangement for repeated classroom use.
• Compact accessory for laboratory electrical experiment kits.

Benefits

• Saves setup time: Different voltage levels can be selected without repeatedly removing batteries.
• Supports practical learning: Helps demonstrate how batteries connected in series increase voltage.
• Flexible power selection: Provides four commonly required low-voltage options.
• Easy connections: Crocodile clips allow quick attachment to compatible experimental circuits.
• Reusable laboratory accessory: Suitable for repeated educational experiments.
• Reduced battery handling: Batteries can remain installed while different voltage combinations are selected.
• Procurement value: Useful accessory for physics laboratories, circuit experiment kits and educational institutions.

Product Specifications

Available Variants

• 1.5 V Output Configuration
• 3 V Output Configuration
• 4.5 V Output Configuration
• 6 V Output Configuration
• Four-battery holder with color-coded leads and crocodile clips

SKU System

• MT-MBH-015 – 1.5 V Configuration
• MT-MBH-030 – 3 V Configuration
• MT-MBH-045 – 4.5 V Configuration
• MT-MBH-060 – 6 V Configuration
• MT-MBH-004-BULK – Four-Cell Holder Bulk Supply

FAQs

What is a Multiple Battery Holder used for?

It is used to hold multiple batteries and provide selectable low-voltage outputs for electrical experiments.
The holder can provide approximately 1.5 V, 3 V, 4.5 V or 6 V.
It is particularly useful in physics and basic electrical laboratory work.

How many batteries can the holder accommodate?

The holder can accommodate up to four batteries.
The internal contact strips provide electrical connections between the installed cells.
The required battery type and size should be confirmed before use.

What voltage outputs are available?

The holder provides selectable outputs of approximately 1.5 V, 3 V, 4.5 V and 6 V.
These options are obtained through different battery connection combinations.
The connected experimental equipment should be suitable for the selected voltage.

Can batteries be removed when changing voltage?

The holder is intended to allow different voltage selections without removing the installed batteries.
Its metal contact arrangement provides the required connection combinations.
This makes it convenient during repeated laboratory circuit demonstrations.

Are crocodile clips included?

Yes, the standard configuration includes insulated crocodile clips with color-coded connecting wires.
They provide convenient temporary connections to compatible laboratory circuits and components.
The clips should be connected only to suitable low-voltage equipment.

Is the Battery Holder suitable for physics laboratories?

Yes, it is suitable for basic electricity, battery, voltage and circuit experiments.
It can be used in schools, colleges and university physics laboratories.
Its multiple voltage options make it useful for different practical demonstrations.

How durable is the Multiple Battery Holder?

The holder is intended for repeated educational and laboratory use with proper handling.
Contact strips, wires and crocodile clips should be protected from excessive mechanical stress.
Correct battery installation and storage can help maintain long-term usability.

Can institutions order battery holders in bulk?

Yes, bulk quantities can be supplied for schools, colleges, universities and laboratory projects.
The holder can be procured as part of electrical experiment kits or as an individual accessory.
Quantity-based quotations can be provided for institutional requirements.

Can the battery holder be customized?

Customization may be considered for selected battery configurations, wiring arrangements or connector requirements.
Feasibility depends on the requested specification and order quantity.
Technical requirements should be shared before confirmation.

How should the Battery Holder be maintained?

Keep the holder clean and dry and inspect the metal contacts periodically.
Check the wires and crocodile clips for damage before use.
Remove batteries during extended storage if recommended for the selected battery type.

How is the product packaged for shipping?

The holder and connecting wires should be packed to prevent damage or excessive movement during transportation.
The crocodile clips can be protected against bending or scratching during shipment.
Additional protective packaging can be arranged for bulk orders.

What is the shipping timeline for bulk orders?

Shipping time depends on stock availability, quantity, packaging requirements and destination.
Standard configurations can be processed according to current inventory.
The confirmed dispatch schedule can be provided with the quotation.

Why Choose Our Products

• Controlled manufacturing: Battery holders are assembled with attention to electrical connection and laboratory usability.
• Quality inspection: Contact strips, wiring and clip connections are checked before supply.
• Practical engineering: Multiple voltage selection simplifies laboratory circuit preparation.
• Reusable construction: Suitable for repeated educational experiments with proper handling.
• Bulk supply capability: Suitable for institutions, distributors, schools, colleges and university laboratory projects.

Call to Action

Equip your physics and electrical laboratory with a practical Multiple Battery Holder offering selectable 1.5 V, 3 V, 4.5 V and 6 V outputs. Micro Technologies supports bulk inquiries, institutional orders, distributor requirements and quotation requests. Share your required quantity to receive a suitable commercial quotation.