Enquiry now

Flow through Orifice and Mouthpiece manufacturer in india

MODAL NO: MTFM-102

QTY


The present set-up is designed to study the flow through different orifices and mouthpieces. It consists of an inlet tank provided with diffuser and provision for fitting Orifice or Mouthpiece at the outlet which can be easily attached or detached without need of any tool. An overflow arrangement is done to vary head and keep it constant at desired level to conduct varieties of experiments. A pointer gauge for measuring ordinates of Jet is fitted on flow channel. Centrifugal pump is used to re-circulate the water from sump tank to the inlet tank and test section and is return back to the sump tank.

The present set-up is designed to study the flow through different orifices and mouthpieces. It consists of an inlet tank provided with diffuser and provision for fitting Orifice or Mouthpiece at the outlet which can be easily attached or detached without need of any tool. An overflow arrangement is done to vary head and keep it constant at desired level to conduct varieties of experiments. A pointer gauge for measuring ordinates of Jet is fitted on flow channel. Centrifugal pump is used to re-circulate the water from sump tank to the inlet tank and test section and is return back to the sump tank. Flow diverter is provided to divert the flow either to measuring tank or sump tank. Constant head condition is maintained in the inlet tank. Experiments can be conducted on different flow rates and measured with the help of measuring tank with piezometer and stopwatch.

•Tanks will be made of Stainless Steel.

•An ENGLISH instruction manual consisting of experimental procedures, block diagram etc. will be provided along with the Apparatus.

•The whole set-up is well designed and arranged on a rigid structure painted with industrial PU Paint.

Experimentation/Learning Objectives

•To determine the co-efficient of discharge of different Orifice and mouthpieces.

•To determine the co-efficient of velocity of different Orifice and mouthpieces.

Utilities Required

•Electricity supply: Single Phase, 220 V AC, 50 Hz, 5-15 Amp. combined socket with earth connection. Earth voltage should be less than 5 volts.

•Water Supply: Initial fill

•Floor Drain.

•Floor Area: 1.5 x 0.75 m.

Set of OrificesMaterial Acrylic Dia. 10mm and 15 mm 1 No. each
Set of Mouthpieces Material Acrylic (1 No. each of ) Dia. 10 mm (L/D = 1) Dia. 10 mm (L/D = 2.5) Dia. 10 mm (L/D = 4)
Pointer Gauge To measure X-Y co-ordinates of Jet.
Water Circulation ½ HP Pump, Crompton/Standard make.
Flow MeasurementUsing Measuring Tank with Piezometer, Capacity 25 Ltrs.
Sump TankCapacity 70 Ltrs.
Inlet Tank5 Ltrs. provided with variable head arrangement.
Stop Watch  Electronic.
Control Panel Comprises ofStandard make On/Off Switch, Mains Indicator, etc.

Related Products